USA: Fern Park 32730 - Florida
1 - 407 - 9126035
BRITCO CONVEYOR SAFETY PRODUCTS


BRITCO Safe-Guard products comply with MSHA
Title 30. They offer best in conveyor injury prevention.



SAFE-GUARD MODULAR CONVEYOR FLAT GUARD



 Safe-Guard Modular Conveyor Flat Guard The Safe-Guard Modular Conveyor Flat Guard is
a modular powder coated all steel guard that is
typically mounted to the conveyor to guard against moving equipment
and protect workers from injury. They are pre-engineered
panels that

Install easily and prevent workers from
unauthorized access and away from moving parts and equipment. Quick and Modular
Set-Up



• Available in various standard and custom
sizes.
?
• Drop pin / wedge clamps holds the guard
securely.
• ? Shipped with mounting kit for quick
assembly.
• ? Comes in two pattern, Square/Oval.
• ? Comes with (2) Single Clips and (2) Wedge
Clamps
• ? Call for custom guards, floor posts and rail
assemblies



Wedge Clamps
The Safe-Guard® Wedge Clamps allows for easy
removal of panels. Use of a cable tie in the closed position meets MSHA and
OSHA safety standards
.

Effective
• ? Safety yellow powder coated steel
for high visibility.
• ? Designed for use on multiple safety
locations.
• ? Keeps workers away from moving parts and
pinch
points on the conveyor.



Regulation
The installation of safety-oriented products
can help create a safer plant that is easier to service
and maintain. See OSHA and MSHAguidelines for safety
compliance.





SAFE-GUARD® HEAVY DUTY RETURN IDLER GUARD



Safe-Guard® Heavy Duty Return Idler Guard
The Safe-Guard® Heavy Duty Return Idler Guard
expanded to include CEMA E & F return idlers.





Design Feature
•? New robust design with a transverse support
to prevent bending.
•? Fits over CEMA E & F return idler
brackets.
•? UV resistant, made from steel, will not
corrode, or wear from abrasion.
•? Stainless steel pins gives easy access to
drop and open the side of the cage for maintenance.
•? Fully adjustable to fit idler and belth
width up to 96P
•? Mounting hardware brackets and end plates
made from powder coated A-36 steel.
•? Cage provides complete pinch point
protection and catches the roll if it breaks away from the brackets.
•? Stable cage has increased slot sizes, helps
prevent material buildup.



Important
The Safe-Guard Heavy Duty Return Idler Guard
is designed to restrict contact with the return idler while the conveyor is
running. Installation of this guard does not supersede any other safety
procedures of safety practices. Failure to observe all instructions could
result in serious injury. It is the owner responsibility that the owner and
each operator read and be familiar with the BRITCO Installation Guide.



Caution
It is the owner responsibility to adjust the
Safe-Guard restricting all contact with the turning idler.

Complies with MSHA Title 30
•  MSHA accepted #
IC-174/3

•? 56.14110 Flying or falling material
•? 56.14112 Guard Construction
•? 56.14107 Moving machine parts
•? 75.1722 Mechanical equipment guards
•? 77.400 Mechanical equipment guards



Meets OSHA requirements 1910.219 for
mechanical power ? transmission apparatus and 56.14107 for moving machine parts. U.S. Patent #6,138,545





SAFE-GUARD V-RETURN IDLER GUARD



Safe-Guard V-Return Idler Guard
• Safe-Guard V-Return Idler Guard fits standard
v-return
• idlers and protects workers and equipment from
falling
• idlers and from dangerous pinch points between
rotating
• idlers and moving belt



Design Feature
• Heavy-duty steel construction
• ? UV resistant, made from UHMW, will not
corrode, or wear from abrasion. ? Durable slotted cage prevents material
build-up
• ? Stainless steel pins gives easy access to
drop and open the side of the cage for maintenance
•? Mounting hardware brackets and end plates
made from powder coated A-36 steel. ? Fully adjustable to fit idler and belt
width up to 96p
•? Fits over CEMA E & F return idler.

Important
Safe-Guard V-Return Idler Guard is designed to
restrict contact with the return idler while the conveyor is running.
Installation of this guard does not supersede any other safety procedures of
safety practices. Failure to observe all instructions could result in serious
injury. It is the owner?s responsibility that the owner and each noperator read
and be familiar with the BRITCO Installation Guide.



Caution
It is the owner responsibility to adjust the
Safe-Guard restricting all contact with the turning idler.



Complies with MSHA Title 30
•? MSHA accepted # IC-174/3
•? 56.14110 Flying or falling material
•? 56.14112 Guard Construction
•? 56.14107 Moving machine parts
•? 75.1722 Mechanical equipment guards
•? 77.400 Mechanical equipment guards



Complies with OSHA requirements 1910.219
•? Mechanical power ? transmission apparatus
•? 56.14107 for moving machine parts
• U.S. Patent #6,138,545



BRITCO Steep Angle Accessories
BRITCO conveyor belt support products for
steep angled conveyors provide a wide variety of support options to performance
and belt life.





Ir Arriba
ADDRESS
USA: Fern Park 32730 - Florida
CALL CENTER
1 - 407 - 9126035
Whatsapp: +1845-518-7074
E-MAIL
Si tienes alguna consulta escribenos: sales@britcobrs.com
FOLLOWS

© Copyright 2018, Britco - All rights reserved.    |      Diseño Web: Publinet